Wood Flooring - Warmawood
Warmawood - flooring for the way you live
Warmawood is a proven system. Developed over a long period of time, the unique composition means that the
traditional problems of movement have been virtually eliminated. When choosing to fit an underfloor heating
system there are now no compromises. You can have the floor you want, with a level of comfort previously
unobtainable. Warmawood provides you with oak floors.....the way you want them!
Engineered to last a lifetime ....Guaranteed
With its tough solid oak face bonded to a warp resistant birch plywood base, warmawood is designed to last
a lifetime. Due to its rugged construction, warmawood is not only suitable for the home, but also commercial
installations such as offices, restaurants and hotels. Warmawood is particularly suitable for new builds,
where there are high humidity levels, and can be laid as soon as it is delivered on site, without the need
for it having to acclimatise.
Quick and Easy Installation, a wide range of options
Warmawood comes in a wide variety of widths, thicknesses (16mm and 21mm for high stress areas such as over
joists etc), finishes and lengths, which means there is something suitable for any room or application. There
are a number of fitting options, floating, glued or nailed, meaning there are no limits to where you can
install the floor. Due to its high stability there is no need for a conventional expansion gap. In order to
limit sound transmission a strip of underlay board is usually fitted between the board and wall.
Low maintenance, Warmawood retains its beauty for generations to come
Warmawood floors will keep their beautiful natural appearance for many years. Simply use a vacuum cleaner
or soft brush on a regular basis to sweep up any loose dirt and debris, followed by a propriety wooden floor
cleaner, ensuring the floor is not allowed to become too wet. Once installed, the qualities of warmawood will
mean you will probably never want to use any other type of flooring system again!
 |
Finished Thickness |
21mm fully load bearing
board |
Wear Layer: |
6mm Solid European Oak |
Base: |
15mm thick multi ply birch plywood |
Board Lengths: |
500mm - 2,700mm |
Face Widths: |
180mm - 250mm |
Board Finishes Available: |
Natural Unfinished |
| |
Natural Pre-Finished |
| Smoked |
| Brushed |
| Distressed |
| Fumed |
| Fumed & Distressed |
| Distressed and Stained |
| Brushed & Smoked |
Bevelled
to 2 sides, Matching Tounge and Groove on all sides |
Warmawood is suitable for most underfloor heating systems provided the correct installation procedures are
followed to our guidelines.
It is essential that the UFH system be used correctly after installation. i.e. it is switched on gradually
and taken to working temperature, not turned up to full temperature straight away as this may cause damage
to the floor.
Solid Floor
Suspended Floor - Heat Emission Plate
Why Warmawood?
- Unique 16mm engineered board, (2 layers of 8mm Birch plywood, laminated and bonded together in a cold press for permanent stability)
- 6mm of solid European oak wear layer
- wide boards 180mm - 200mm - 220mm - 240mm
- long boards 500mm - 2700mm
- micro bevelled for defined lengths
- tongued, grooved and ends matched
- knots are all filled and sanded
- high quality finish requires no sanding after installation
- durability is designed to last a lifetime
- architect specified
- fully guaranteed
- fully tested
- the only engineered oak flooring recommended by the under floor heating industry
- suitable for use with all under floor heating systems
- a load bearing structural floor therefore can be laid directly on to floor joists providing a good response time for under floor heating
- can be glued directly onto concrete screed using recommended adhesives
- can be laid as a floating floor
- wide range of finishes are so versatile warmawood can be suited to any age or style of property from contemporary to traditional
- ecologically friendly and kind to the environment
- provides you with oak floors the way you want them
That's Why Warmawood